Electric Showers Supplied and Fitted in St Helens from £280

Usually 1 to 2 hours. We remove the old shower, supply and fit the new one, test it fully and clean up. You can use your new shower immediately after we leave. For new installations where a new circuit is also required, allow 3 to 5 hours depending on the cable run distance.

Yes. If you have a 6mm cable you can go up to 8.5kW with no extra work needed. For anything more powerful, such as 9.5kW or 10.5kW, we install a new 10mm cable from your consumer unit at an additional cost of around £350 to £450. This is covered under IET BS 7671 wiring regulations and is Part P notifiable work that we certify for you.

We fit Triton and Mira only. Triton is the value pick, and the T80 is what we put in most rentals around Parr, Thatto Heath and Newton-le-Willows. Mira is the premium end, with digital controls and anti-limescale tech. We never fit cheap unbranded units. Electrical Safety First says to always use a qualified electrician for this work. Our guide on how to choose an electrician helps you pick.

Yes. Any new shower circuit is notifiable under Part P of the Building Regulations. We are a NICEIC registered contractor, so we self-certify and hand you the certificate on the day. It costs nothing extra. You will need it when you sell the house.

An electrician. An electric shower heats its own water, so it runs on a high current circuit of its own. That work is notifiable under Part P of the Building Regulations and a registered electrician has to certify it. A plumber can move the pipe but cannot sign off the electrics.

A mixer shower fed from your boiler is the other way round. No element, no big circuit, so that one is plumbing work. Our sister company Liverpool Emergency Plumber handles those.

Usually not. Our budget unit is the Triton T80 Easi-Fit, picked because its backplate is wider and it takes the water in from several positions. That means it sits over the marks and holes the old shower leaves behind.

We also put up a new head and rail, and reconfigure the pipework if the new inlet does not line up. If your old shower was much bigger than the new one, or the tiles behind it are already damaged, we tell you at the quote and not on the day.

From £280 all in for a replacement on an existing shower circuit. That is the shower, the fitting, taking the old one away and a 2 year labour guarantee in one price.

Mid range models are £400 to £450. Premium models start at £500. If there is no shower circuit in the property at all, a complete installation is £800 to £1,400 depending on how far the bathroom is from your fuse box.

Just make sure we can get to the shower and the fuse box. We bring the shower and all the materials. We take the old one away too. Clearing the floor around the shower helps us work faster.

Between £800 and £1,400 where there is no shower circuit in the property yet. The price depends on how far your bathroom is from the fuse box and which shower you pick.

A flat or small terrace with a short cable run is usually £800 to £1,000. A standard St Helens three bed semi is £1,000 to £1,200. A larger detached house in Eccleston or Rainford is £1,200 to £1,400.

No. The price we quote is the price on your invoice, wherever you are in the borough. Town centre, Haydock, Rainford, Newton-le-Willows or Billinge, it is the same figure.

We cover St Helens 24/7. Ring 07399 676656 at any hour and we will get your hot water back on. Out of hours rates apply, and we tell you the price before we set off. A real person answers every call.

Most standard models last 4 to 6 years. Premium ones with anti-limescale technology last longer. Soaking the showerhead in white vinegar now and then helps the element last. Once an element goes, a new shower is nearly always cheaper than a repair.