Home› Learning Centre› No Power in the House? How To Tell a Power Cut From a Fault
Electrical Safety

No Power in the House? How To Tell a Power Cut From a Fault

When everything goes off at once, the first question is whether the problem is yours or the network's. If it is a power cut, an electrician cannot help and you should not pay for one. If it is a fault in your home, the network operator will not fix it. Two minutes of checks will tell you which.

Step 1: Is It Just Your House?

Look out of the window. Are the street lights on? Do your neighbours have lights on? Ask next door if you can.

  • Neighbours are off too: it is almost certainly a power cut. Call 105, the free national power cut line, or check your network operator's power cut map. In Liverpool, 105 puts you through to the local network operator. Do not call an electrician.
  • Neighbours have power: the problem is probably in your property. Go to step 2.

Step 2: Check Your Consumer Unit

Find your consumer unit (fuse box). Look for any switch pointing down or in the middle position when the others are up.

  • The main switch is off: switch it back on once. If it stays on, check whether everything works.
  • An RCD has tripped: RCDs are the wider switches, usually with a test button, that protect a group of circuits. Switch it back on once.
  • Nothing has tripped: the problem may be your supply fuse or meter. See step 4.
Only try once

If a switch trips again straight away, do not keep resetting it. Each attempt puts power back into whatever the fault is. If the unit is hot, crackling, scorched or smells of burning, do not touch it at all and call an emergency electrician.

Step 3: It Trips Again Straight Away

Switch off every individual circuit breaker (the small switches), then turn the RCD or main switch back on. Now switch the circuit breakers back on one at a time. When one trips the RCD again, you have found the faulty circuit. Leave that one off and you may get the rest of the house back.

If the faulty circuit is the sockets, unplug everything on it and try again. A faulty appliance is a very common cause. Kettles, toasters, washing machines and outdoor lights are the usual suspects. Our guide to why an RCD keeps tripping goes into this in detail.

Step 4: Nothing Has Tripped, Still No Power

If your neighbours have power, nothing on your board has tripped, and you still have nothing, the fault may be in the supplier's main fuse (in the cut-out next to your meter) or the cable into your property. Check your meter display. If it is blank, call 105 and tell them your neighbours have power but you do not. That equipment belongs to the network operator and only they can work on it.

If you have a prepayment meter, check you have credit and that any emergency credit has not run out. It sounds obvious, but it catches people out.

When To Call an Electrician

  • A breaker or RCD trips every time you reset it, even with appliances unplugged
  • You have power on some circuits but cannot get one back
  • There is any burning smell, buzzing or heat from the board or a socket
  • The power went off when water leaked into a light or socket
  • The power went off when you were drilling, nailing or screwing into a wall

For any of these, our emergency electrician service in Liverpool runs 24/7, with a real person on the phone.

What It Costs

Fault finding is charged at the same hourly rate as the repair: £120 an hour Monday to Friday, 9am to 5pm and £150 an hour evenings, nights and weekends. One hour minimum, then 30 minute increments, parts at cost, no callout fee on top. If you call and it turns out to be a power cut, we will tell you to ring 105 rather than send someone out.

Still No Power?

24/7 emergency electrician across Liverpool. A real person answers.

Related Guides