A leak from a bathroom, a burst pipe or a roof often finds its way into the nearest light fitting, because water follows the cables. Water and electricity together are an immediate shock and fire risk. Here is how to make it safe without putting yourself in danger, and what happens next.
That includes the light switch for the room with the leak. Do not stand in water to reach anything electrical. If there is smoke, sparking or fire, get out and call 999.
Make It Safe, In This Order
1. Switch off the electricity at the consumer unit, using the main switch, but only if you can reach it with dry hands, without standing in water, and the unit itself is dry. If water is near or in the consumer unit, do not touch it. Keep away and call us, or call 105 if the meter area is affected.
2. Stop the water. Turn off the water at the stopcock, usually under the kitchen sink. If the leak is from a neighbour's flat or the roof, contact them or your landlord or managing agent.
3. Keep people out of the room. Put a bucket under drips if you can do it without touching anything electrical.
4. Do not switch the power back on, even if the RCD lets you. Water can sit inside fittings and back boxes long after the ceiling looks dry.
5. Call an electrician. Our emergency electricians in Liverpool work 24/7, and a real person answers the phone.
Why Did the Power Trip?
If your RCD tripped when the water arrived, it did exactly what it is designed to do. Water creates a path for current to leak to earth, the RCD detects the imbalance and cuts the power in a fraction of a second. If it will not reset, that is because the fault is still there. Do not keep trying. Older boards without RCD protection may not trip at all, which makes the situation more dangerous, not less.
Can I Use the Rest of the House?
Sometimes, but only once an electrician has confirmed which circuits are affected. Lighting and socket circuits often run through more than one room, so the circuit feeding the wet light may also feed rooms that look fine. When we attend, we isolate the affected circuits and restore the ones that test safe, so you are not left without power longer than necessary.
When Can the Power Go Back On?
Only after the affected circuits have been tested. We check insulation resistance, which shows whether moisture is still present in cables and accessories, and we open up the wet fittings to check for water and corrosion. Fittings that have been soaked are often replaced rather than dried out. Some circuits need a few days to dry before they test clear. Switching back on too early risks a shock, a fire, or the RCD tripping repeatedly.
Leaks into electrics are one of the most common tenant emergencies in Liverpool flats and HMOs. Tenants should report it to the landlord or agent straight away. Landlords: we can attend, make safe and deal with the tenant directly. See our landlord electrical safety services.
Insurance
Water damage to electrics is often covered under home or landlord insurance. Take photos of the leak and the affected fittings before anything is moved, and ask your insurer what they need. Your invoice, and any certificate issued for the repair, records what was found and what was done.
What It Costs
Making safe, testing and repairing are charged by the hour: £120 an hour Monday to Friday, 9am to 5pm and £150 an hour evenings, nights and weekends. One hour minimum, then 30 minute increments, parts at cost and no callout fee on top. Replacement fittings are charged at cost.
Do not switch back on. Call our 24/7 emergency line.